YDA5600 - SAMPSON PLUS (Scaler & polisher combined)

We have incorporated state-of-the-art, phase lock loop microchip circuitry of an ultrasonic dental scaler in to a new, highly efficient and multi-operational combination scaling/polishing unit-the SamSon-Plus.A simple turn of the switch allows you to alternate from scaling to polishing. Plus enjoy the benefits of a variety of other operations. Samson/Plus is auto tuned. By Constantly scanning and compensating, the oscillation is maintained at optimum frequency when pressure is applied to the tip, eliminating even partial loss of power. You can perform curettage, deep scaling of heavy calculus and stains, and conclude the prophylaxis treatment to polish and smooth the teeth-all in one operation.

Sharp instruments are not required. Vet-Sonic stainless steel, heat-treated tips glide smoothly across the tooth surface. The water flows internally through the tip, directly to the operative site, gently cooling and lubricating the tooth and washing away the dislodged debris.
At the touch of the foot control, the chevron-shaped transducer (stack) surges power to the tip instantly without stalling. Even after the foot control is released, the scalers delayed circuitry continues to activate for two (2) seconds, dispersing the water in to a fine mist, there by eliminating annoying after drip. The stack remains in the hand piece. The tips are inserted in to the nosecone, turned clockwise and tightened lightly but firmly. With this method, you can change and /or replace tips as many times as you wish, using the same stack.

Autoclavable:
All hand pieces, metal accessory angles, metal discs and burs, except the micromotor, are autoenclavable. Catheter for the treatment of obstructive lithiasis in tomcats is available for the Sampson/plus

Scaling mode:
Scaler hand piece
Stack (Transducer) inserted in the hand piece
2 scaling tips (M1) pointed universal &(M4) broad spatula
Tip wrench
Water line with male quick disconnect attached
Power cord grounded for safety
Footswitch

Polishing Mode:
High Torque micrometer with variable speed from 300 to 30,000 RPM
Straight hand piece (also called nose cone)
Prophy angle for snap-on rubber cups
Starter kit with 10 rubber cups and 10 prophy paste cups
Hand piece rest

Also:
Jack for plug in of micromotor to the front of unit
One knob for adjusting Micromotor speed & scaling power
Knob for adjusting the water flow, in scaling mode
Forward and reverse switch
Switch to alternate from scalar to polisher
Owners manual

Technical Data:

Water Input Pressure:
30-60 PSI (2-5 Bar)

Power Supply:
110/220 VAC 50/60 Hz 

Operating Frequency:
18,000 Hz for scaling mode, Auto tuned

Dimension:
Width 7; Length 8 : Height 2
17.8cm x 21.5 cm x 7cm

Net Weight:
8 Lbs / 3.8 Kg

Shipping Weight:
10 Lbs/4.5 Kg

Accessories of YD A5600

Optional:
Portable Water Tank
Contra Angle for handpiece
(Cutting & drilling up to 25,000 rpm)
Carbide Burs  (Kit of 6)